1. Do not use the round blade, the need to hang the […]
1. Do not use the round blade, the need to hang the blade vertically on the dry shelf, can not be flat blade flat, flat will lead to deformation of the round blade.
2. Round blade of the serrated super-hard sharp, to prohibit the collision, fall to the ground, you must gently.
3. Operation must bring protective cover, work gloves, helmets, safety shoes, protective glasses.
4. Before installing the round blade, you must first confirm the performance and purpose of the saw, make sure that the cutting direction of the circular blade indicates that the cutting direction is the same as that of the saw. Do not install in the opposite direction, the wrong direction may lead to blade sawtooth off, to prevent accidents.
5. When installing a round blade, you must first check whether the round blade is cracked, distorted, flattened, and so on.
6. After installation, make sure that the center hole of the round blade is securely fastened to the flange of the saw, and the washer must be set with a gasket; then, gently push the hand to confirm whether the round blade is eccentric The
7. Do not exceed the specified maximum speed when using.
8. Before using the pre-turn: put on a new blade, the use of pre-turn for a minute before the saw into the working state, to cut.
9. Round blade hardness requirements are very important, and sometimes your material no matter how hard the hardness requirements of the blade will appear collapse, soft mouth.