Industry News

Home / News / Industry News (Page 3)
  • How to repair the blade during the blade customization process

    How to repair the blade during the blade customization process

    31 Aug 2018

    In the production development of some custom-made blade customization companies, many people find that during the use of the blade, it is inevitable that certain damage will occur, sometimes even severe. It is understood that the damage is mainly div...

  • Stainless steel surfaces must be cleaned

    Stainless steel surfaces must be cleaned

    25 Aug 2018

    Stainless steel blades are suitable for food processing industries such as food, paper, leather, garden, plastics, electronics, textiles, woodworking and carton. They are suitable for a wide range of applications, high utilization rates, and a verita...

  • Heat treatment of mechanical  knife blades

    Heat treatment of mechanical knife blades

    17 Aug 2018

    The mechanical blade is a tool for cutting various materials such as wood, paper, printing, leather, plastic wood, and the heat treatment of the mechanical blade. Due to the special nature of the processing, tungsten steel blades have a high hardness...

  • How to choose the angle of use of knife blades

    How to choose the angle of use of knife blades

    11 Aug 2018

    The friction between the non-working part of the auxiliary cutting edge and the workpiece can be reduced; however, if the angle of the auxiliary edge is too large, the angle of the cutting edge is reduced, the residual area of the surface of the work...

  • What is Leading angle of knife

    What is Leading angle of knife

    03 Aug 2018

    By changing the size of the main declination, the ratio of the back force and the feed force can be adjusted; when the main declination is increased, the back force is reduced and the feed force is increased. By reducing the lead angle, the cutting t...

  • What is Knife Blade inclination?

    What is Knife Blade inclination?

    26 Jul 2018

    Changing the direction and size of the blade inclination can control the flow direction of the chips. For intermittent cutting, the appropriate edge angle allows the cutting edge to gradually cut into and out of the workpiece, smoothing the impact an...

12345...10...>>